Kickrate
HS 84626219Chapter 84

Machine-tools (including presses) for working metal by forging, hammering or die forging (excluding rolling mills); machine-tools (including presses, slitting lines and cut-to-length lines) for working metal by bending, folding, straightening, flattening, shearing, punching, notching or nibbling (excluding draw-benches); presses for working metal or metal carbides, not specified above; Cold metal working presses; Mechanical presses; Numerically controlled, other

Classified under HS code 84626219, Chapter 84. Commercial imports to Indonesia require a licensed Importer of Record (consignee) for customs clearance.

Duty15%Value Added Tax (PPN)12%Income Tax2.5%0% FTA available

Duties & Taxes

Source: Indonesia INSW

Import Duty

Bea Masuk (BM MFN)

15%

Applied on the CIF value of goods. This is the base customs duty set by Indonesia Ministry of Finance. May be reduced to 0% under a Free Trade Agreement.

Value Added Tax

Pajak Pertambahan Nilai (PPN)

12%

Applied on the taxable base (CIF + import duty). Indonesia uses a special calculation: the tax base is adjusted to 11/12 of the import value before applying the 12% rate.

Income Tax

Pajak Penghasilan (PPH)

2.5%
7.5% without IOR

Advance income tax collected at import. Rate depends on whether the importer holds an API license: 2.5% with license, 7.5% without. Using an Importer of Record qualifies for the lower rate.

Import Cost Calculator

HS 84626219· Estimate your total landed cost

$USD
1 USD =IDR
$0

Select origin country and enter shipment value

Free Trade Agreement Rates for HS 84626219

The standard import duty for machine-tools (including presses) for working metal by forging, hammering or die forging (excluding rolling mills); machine-tools (including presses, slitting lines and cut-to-length lines) for working metal by bending, folding, straightening, flattening, shearing, punching, notching or nibbling (excluding draw-benches); presses for working metal or metal carbides, not specified above; cold metal working presses; mechanical presses; numerically controlled, other is 15% (MFN rate). Under 5 active trade agreement(s), this product can be imported duty-free (0%) with a valid Certificate of Origin.

Duty-free import available from 5 agreements including IACEPA, ICCEPA, IECEPA and 2 more. On a $50,000 shipment, this saves approximately $7,500 in import duty.
AgreementRate
AANZFTA0%
ACFTA0%
AIFTA0%
AJCEP0%
AKFTA0%
ATIGA0%
IACEPA0%
IACEPA0%
ICCEPA0%
ICCEPA0%
IECEPA0%
IECEPA0%
IJEPA0%
IKCEPA0%
IKCEPA0%
RCEP-Japan1.5%
RCEP-Korea1.5%
RCEP-ASEAN1.5%
RCEP-Australia1.5%
RCEP-China1.5%
RCEP-Japan2%
RCEP-ASEAN2%
RCEP-China2%
RCEP-Australia2%
IUAE-CEPA2.1%
RCEP-Korea2.5%
IUAE-CEPA3.2%
AHKFTA5%
AHKFTA5%

Required Customs Documents

These are the customs declaration forms applicable to this HS code for import into Indonesia.

16
Release from Customs Zone to Bonded Logistics Center
BC 1.6
20
Import Declaration (PIB)
BC 2.0
23
Import to Bonded Storage Facility
BC 2.3
25
Release from Bonded Storage Facility
BC 2.5
28
Import from Bonded Logistics Center
BC 2.8
511
Free Trade Zone — Entry from Outside Customs Territory
FTZ01 - Pemasukan dari Luar Daerah Pabean
513
Free Trade Zone — Release to Other Customs Area
FTZ01 - Pengeluaran ke Tempat Lain dalam Daerah Pabean
611
Special Economic Zone — Entry from Outside Customs Territory
KEK - Pemasukan dari LDP
632
Special Economic Zone — Release to Domestic Market
KEK - Pengeluaran ke TLDDP

Import Regulations

Special permits or certifications required for importing this product.

Import License for Capital Goods in Used Condition / Certificate
LS Impor Barang Modal dalam Keadaan Tidak Baru / Surat Keterangan
Permendag Nomor 16 Tahun 2025 sebagaimana telah diubah dengan Permendag Nomor 37 Tahun 2025 dan Permendag Nomor 24 Tahun 2025
Capital Goods in Used Condition
PI Capital Goods in Used Condition / Certificate
PI Barang Modal dalam Keadaan Tidak Baru / Surat Keterangan
Permendag Nomor 16 Tahun 2025 sebagaimana telah diubah dengan Permendag Nomor 37 Tahun 2025 dan Permendag Nomor 24 Tahun 2025
Capital Goods in Used Condition

Related HS Codes in Chapter 84

84131100

Pumps for liquids, whether or not fitted with a measuring device; liquid elevators — Pumps for dispensing fuel or lubricants, of the type used in filling-stations or in garages

84133040

Pumps for liquids, whether or not fitted with a measuring device; liquid elevators — Water pumps of a kind used for engines of motor vehicles of heading 87.02, 87.03 or 87.04

84133090

Pumps for liquids, whether or not fitted with a measuring device; liquid elevators; Fuel, lubricating or cooling medium pumps for internal combustion piston engines, other

84136040

Pumps for liquids, whether or not fitted with a measuring device; liquid elevators — Water pumps, with a flow rate exceeding 8,000 m3/h but not exceeding 13,000 m3/h

84137031

Pumps for liquids, whether or not fitted with a measuring device; liquid elevators — With an inlet diameter not exceeding 200 mm

84137043

Pumps for liquids, whether or not fitted with a measuring device; liquid elevators — With inlet diameter not exceeding 200 mm, not electrically operated

84137049

Pumps for liquids, whether or not fitted with a measuring device; liquid elevators; Other centrifugal pumps; Other water pumps, with a flow rate not exceeding 8,000 m3/h, other

84138114

Pumps for liquids, whether or not fitted with a measuring device; liquid elevators — Water pumps with a flow rate not exceeding 8,000 m3/h, not electrically operated

Need a consignee for this import?

Kickrate acts as your Importer of Record in Indonesia. No local company required.

Schedule a call