Sekrup, baut, mur, sekrup rel, kait sekrup, paku keling, pasak, pasak kunci, cincin pipih (termasuk cincin pipih pegas) dan barang semacam itu, dari besi atau baja — Dengan diameter luar shank tidak melebihi 16 mm
Classified under HS code 73181910, Chapter 73. Commercial imports to Indonesia require a licensed Importer of Record (consignee) for customs clearance.
Bea & Pajak
Sumber: Indonesia INSWBea Masuk
Bea Masuk (BM MFN)
Applied on the CIF value of goods. This is the base customs duty set by Indonesia's Ministry of Finance. May be reduced to 0% under a Free Trade Agreement.
Pajak Pertambahan Nilai
Pajak Pertambahan Nilai (PPN)
Applied on the taxable base (CIF + import duty). Indonesia uses a special calculation: the tax base is adjusted to 11/12 of the import value before applying the 12% rate.
Pajak Penghasilan
Pajak Penghasilan (PPH)
Advance income tax collected at import. Rate depends on whether the importer holds an API license: 2.5% with license, 7.5% without. Using an Importer of Record qualifies for the lower rate.
Import Cost Calculator
HS 73181910· Estimate your total landed cost
Select origin country and enter shipment value
Free Trade Agreement Rates for HS 73181910
The standard import duty for sekrup, baut, mur, sekrup rel, kait sekrup, paku keling, pasak, pasak kunci, cincin pipih (termasuk cincin pipih pegas) dan barang semacam itu, dari besi atau baja — dengan diameter luar shank tidak melebihi 16 mm is 12.5% (MFN rate). Under 2 active trade agreements, this product can be imported duty-free (0%) with a valid Certificate of Origin.
| Agreement | Rate |
|---|---|
| ICCEPA | 0% |
| ACFTA | 0% |
| IKCEPA | 0% |
| ATIGA | 0% |
| IACEPA | 0% |
| IACEPA | 0% |
| ICCEPA | 0% |
| IKCEPA | 1.6% |
| AIFTA | 5% |
| AANZFTA | 5% |
| IECEPA | 5.2% |
| IECEPA | 6.3% |
| AKFTA | 8% |
| IJEPA | 12% |
| RCEP-Korea | 12.5% |
| AHKFTA | 12.5% |
| AHKFTA | 12.5% |
| RCEP-Japan | 12.5% |
| RCEP-Japan | 12.5% |
| RCEP-Korea | 12.5% |
| RCEP-ASEAN | 12.5% |
| RCEP-ASEAN | 12.5% |
| RCEP-Australia | 12.5% |
| RCEP-Australia | 12.5% |
| RCEP-China | 12.5% |
| RCEP-China | 12.5% |
| AJCEP | 15% |
| IUAE-CEPA | % |
| IUAE-CEPA | % |
Dokumen Bea Cukai yang Diperlukan
These are the customs declaration forms applicable to this HS code for import into Indonesia.
Regulasi Impor
Special permits or certifications required for importing this product.
Related HS Codes in Chapter 73
Other articles of iron or steel; Articles of iron or steel wire, other
73202090Springs and leaves for springs, of iron or steel; Helical springs, other
73121099Stranded wire, ropes, cables, plaited bands, slings and the like, of iron or steel, not electrically insulated; Stranded wire, ropes and cables, other
73042410Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel — Casing and tubing with a yield strength less than 80,000 psi, without threaded end
73102191Tanks, casks, drums, cans, boxes and similar containers, for any material (other than compressed or liquefied gas), of iron or steel, of a capacity not exceeding 300 l, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment — Of tinplate
73065019Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel; Other, welded, of circular cross-section, of other alloy steel; Boiler tubes, other
73069097Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel — Other, with an internal diameter more than 12.5 mm, an external diameter less than 140 mm and containing by weight less than 0.45% of carbon
73042430Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel — Casing and tubing with a yield strength 80,000 psi or more, whether or not with threaded end
Need a consignee for this import?
Kickrate acts as your Importer of Record in Indonesia. No local company required.