Stoves, ranges, grates, cookers (including those with subsidiary boilers for central heating), barbecues, braziers, gas-rings, plate warmers and similar non-electric domestic appliances, and parts thereof, of iron or steel — For solid fuel
Classified under HS code 73211910, Chapter 73. Commercial imports to Indonesia require a licensed Importer of Record (consignee) for customs clearance.
Droits et taxes
Source : Indonésie INSWDroit d'importation
Bea Masuk (BM MFN)
Applied on the CIF value of goods. This is the base customs duty set by Indonesia's Ministry of Finance. May be reduced to 0% under a Free Trade Agreement.
Taxe sur la valeur ajoutée
Pajak Pertambahan Nilai (PPN)
Applied on the taxable base (CIF + import duty). Indonesia uses a special calculation: the tax base is adjusted to 11/12 of the import value before applying the 12% rate.
Impôt sur le revenu
Pajak Penghasilan (PPH)
Advance income tax collected at import. Rate depends on whether the importer holds an API license: 2.5% with license, 7.5% without. Using an Importer of Record qualifies for the lower rate.
Import Cost Calculator
HS 73211910· Estimate your total landed cost
Select origin country and enter shipment value
Free Trade Agreement Rates for HS 73211910
The standard import duty for stoves, ranges, grates, cookers (including those with subsidiary boilers for central heating), barbecues, braziers, gas-rings, plate warmers and similar non-electric domestic appliances, and parts thereof, of iron or steel — for solid fuel is 20% (MFN rate). Under 3 active trade agreements, this product can be imported duty-free (0%) with a valid Certificate of Origin.
| Agreement | Rate |
|---|---|
| RCEP-ASEAN | 0% |
| ACFTA | 0% |
| AANZFTA | 0% |
| RCEP-Japan | 0% |
| RCEP-Japan | 0% |
| ATIGA | 0% |
| IACEPA | 0% |
| IACEPA | 0% |
| RCEP-ASEAN | 0% |
| IKCEPA | 3.3% |
| IKCEPA | 3.6% |
| RCEP-Australia | 4% |
| RCEP-China | 4% |
| RCEP-China | 4.5% |
| RCEP-Australia | 4.5% |
| AIFTA | 5% |
| AKFTA | 5% |
| RCEP-Korea | 7.5% |
| RCEP-Korea | 7.5% |
| IUAE-CEPA | 10% |
| IUAE-CEPA | 12% |
| ICCEPA | 16% |
| ICCEPA | 17% |
| AJCEP | 20% |
| AHKFTA | 20% |
| AHKFTA | 20% |
| IECEPA | 20% |
| IJEPA | 20% |
| IECEPA | 20% |
Documents douaniers requis
These are the customs declaration forms applicable to this HS code for import into Indonesia.
Réglementations sur l'importation
Special permits or certifications required for importing this product.
Related HS Codes in Chapter 73
Other articles of iron or steel; Articles of iron or steel wire, other
73202090Springs and leaves for springs, of iron or steel; Helical springs, other
73121099Stranded wire, ropes, cables, plaited bands, slings and the like, of iron or steel, not electrically insulated; Stranded wire, ropes and cables, other
73042410Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel — Casing and tubing with a yield strength less than 80,000 psi, without threaded end
73102191Tanks, casks, drums, cans, boxes and similar containers, for any material (other than compressed or liquefied gas), of iron or steel, of a capacity not exceeding 300 l, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment — Of tinplate
73065019Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel; Other, welded, of circular cross-section, of other alloy steel; Boiler tubes, other
73181910Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter-pins, washers (including spring washers) and similar articles, of iron or steel — Having a shank of an external diameter not exceeding 16 mm
73069097Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel — Other, with an internal diameter more than 12.5 mm, an external diameter less than 140 mm and containing by weight less than 0.45% of carbon
Need a consignee for this import?
Kickrate acts as your Importer of Record in Indonesia. No local company required.